Light up your world and create endless possibilities
Effect mode
Multiple RGB Software support
Bring your own RGB software
Nollie controllers are not locked to a proprietary app. Set them up in SignalRGB in minutes, drive them from OpenRGB on Linux, run ambient screen sync through Skydimo, or use NollieRGB for direct low-level control of every channel.
- SignalRGB — per-device layouts and screen-reactive effects
- OpenRGB — open source, cross-platform, no vendor account
- Skydimo — ambient bias lighting driven by your display
- NollieRGB — first-party control over every channel
SupportedNollieRGB
First-party
SupportedSignalRGB
Windows
SupportedOpenRGB
Windows / Linux
SupportedSkydimo
Ambient sync
The controller does the thinking
Modes, boot sequences, canvases and full light shows all live in firmware — running with your PC, without it, and improving long after you buy.
One device, three modes
The firmware watches the scene and switches by itself: when your PC takes over, the controller follows it in real time. When it doesn't, onboard effects carry on — no background app required.
- Real-time direct drive with SignalRGB / OpenRGB
- Onboard hardware effects via NollieRGB
- FSEQ sequence playback on Nollie 16 / 32
- Automatic switching — no clicks, no restarts
Run mode
AutoDirect drive
PC connected — SignalRGB / OpenRGB streaming in real time
Hardware effects
NollieRGB onboard engine — no software running
FSEQ playback
Stored light shows — Nollie 16 / 32
Switches the moment the scene changes — nothing to click.
Power on with a ritual
Every boot opens with your own intro animation, then settles into a resident looping effect. Two stages, each with its own effect, speed and canvas — from the first second, it looks designed.
- Custom boot effect
- Loop effect after startup
- Per-stage effect, speed and canvas
- No PC needed for any of it
Boot sequence
0:00 → forever
Stage 1
Boot Effect
Stacking
Stage 2
Loop Effect
Rainbow Cycle
Many strips, one canvas
Group strips on different ports into a single canvas. Effects flow across them as if they were one long strip — and the mapping lives on the controller, so it works offline too.
- Free grouping across ports
- Adjustable order, direction and origin
- Mappings stored on the controller
- Works fully offline
Canvas mapping
4 ports → 1 canvas
One canvas — effects flow end to end
Mapping stored on the controller · works offline
A light show you can take anywhere
Sequence a full show in xLights, load it onto the controller, and it plays on loop from the moment power arrives — no PC attached. A capability almost unheard of at this price.
- Industry-standard FSEQ playback
- Export from xLights and other sequencers
- The whole show stored onboard
- Loops from power-on, fully offline
Show playback
No PC attached
xLights, Vixen — or any sequencer that exports .fseq
holiday_show.fseq
Loops on powerThe whole show lives onboard — power it anywhere and it plays.
Know what your power is doing
Confidence for heavily lit builds: the controller watches its own rails in real time. Brightness up, current up — you see the relationship live, so a heavy load never has to be a guess.
- Nollie 8 — dual SATA power detection
- Nollie 16 / 32 — live voltage & current
- Load at a glance in the client
- Headroom you can actually see
Power monitor
LiveXT30 Current — recent history
Voltage
12.1 V
Current
Headroom
Plenty
Better after you buy it
Firmware is not frozen at the factory. Update online with one click in the client, and new features keep arriving on the hardware you already own.
- One-click online updates in the client
- New effects and features over time
- Older devices get the new tricks too
- Nothing to flash, nothing to solder
Firmware update
v2.4 readyNollie 32
v2.3.1 installed
What's new in v2.4
- New hardware effects
- Canvas improvements
- Stability fixes
One click in the client — nothing else to do.
A RISC-V core doing the work
In our controllers we use a high-performance RISC-V core processor to deliver an extraordinary performance experience. Whether it is processing complex light effect algorithms or controlling a large number of LEDs in real time, the controller handles it easily — giving your lighting an eye-catching level of detail and smoothness.
- 144MHz
- Running Rate
- 8000Hz
- USB Response Rate
- 1024Byte
- Bandwidth/packet
Programmable lighting controllers, from one strip to 8,192 LEDs
Pick the one that fits your build.
Nollie 8
8 channels · 126×8 LEDs
Small and neat, with room for a full fan array plus strips — the value pick of the range.
View details
Nollie 16
16 channels · 256×16 LEDs
Designed for large ATX cases and builds with dramatic lighting effects. Plays FSEQ shows offline.
View details- Flagship
Nollie 32
32 channels · 256×32 LEDs
The flagship: double the output, native Lian Li Strimer 3 ports. Plays FSEQ shows offline.
View details
Which controller fits your build?
The architecture, the software support and the effects are the same across the range. What changes is how much you can attach.
| Specification | Nollie 1 | Nollie 8 | Nollie 16 | Nollie 32Flagship |
|---|---|---|---|---|
| ARGB channels | 1 | 8 | 16 | 32 |
| Processor | RISC-V core · 48 MHz | RISC-V core · 48 MHz | RISC-V core · 144 MHz | RISC-V core · 144 MHz |
| USB speed | USB 1.1 · 12 Mbps | USB 1.1 · 12 Mbps | USB 2.0 · 480 Mbps | USB 2.0 · 480 Mbps |
| External flash | — | — | 128 Mbit | 128 Mbit |
| Power input | USB | 2× SATA | 2× Molex | 2× Molex |
| Power handling capacity | 13 W | 2× 20 W | 2× 37.5 W | 2× 37.5 W |
| Overcurrent protection | Power management IC | 2× 4 A self-resetting fuse | 15 A fuse | 15 A fuse |
| Lian Li Strimer 3 ports | — | — | — | Yes |
| LED max frame rate | 120 Hz | 60 Hz | 120 Hz | 120 Hz |
| FSEQ player | — | — | Yes | Yes |
Full mechanical and electrical specifications are listed on each product page.
Your lighting, your rules
Pick the channel count your build needs. Buy from AliExpress or the Nollie store.