How to setup Skydimo

Download Skydimo

1. Head over to https://skydimo.com/en/download and download Skydimo Windows DIY Enthusiast version.
   

Setup

1. Once inside the application, Click on “Settings” on the bottom left, and click on “Manage Third-Party Device Support” and enable all devices.
   
2. If you have SignalRGB installed, you can also use Skydimo with SignalRGB supported devices. To do that, check “Script driver support”
   
3. Back to Home, click on one of your RGB Controllers.
   
4. You’ll need to tell Skydimo what components you have on your Nollie Controller channels, click the button on the top right.
   
5. Under Layouts you will find a big button to add layouts, click on it, you can choose from all the available layout preset.
   
6. If you have more than one component on your header, you can add more layouts.
   
7. If you have Lian Li Strimer 24-pin motherboard, Add a custom 20 LEDs strip to Channel ATX 1, ATX 2, ATX 3, ATX 4, ATX 5 and ATX 6. (This step is only applicable for Nollie32)
   
8. If you have Lian Li Strimer GPU dual 8-pin or triple 8-pin, Add a custom 27 LEDs strip to Channel GPU 1, GPU 2, GPU 3, GPU 4, GPU 5 and GPU 6. Dual 8-pin leave Channel GPU 5 and GPU 6 at 0 LEDs. (This step is only applicable for Nollie32)

Setup Solid color

1. Solid color is very straight forward. Click on any of your devices and click Simple, Single Color and set the color of your choice.
   
2. If you wish to set all devices to the same color, click on “Control All Devices” button on home page.
   

Setup Effects

1. Same as solid color, click on any of your devices and choose any of the available effects.